Precautions of polymer concrete finished drainage ditches cutting

When the polymer concrete finished drainage ditch needs to have an intersection or a non-standard length in the construction,cutting of the finished drainage ditch is a necessary process.In the process of completing the cutting on the spot, the following contents should be noted.

Choose the right cutting blade

The finished drain should be selected with the same scafe of diamond swanstone as cutting of masonries.The section of the groove after cutting should be glued to seal.If the groove is to carry corrosive liquid in the future, the joint head should ensure that the sealant/adhesive is chemically resistance.

Self-made finished drain joints
It is necessary to cut the opening on the side of one finished drain to the end of the other.
First,it need mark the area to be cut on the side wall of the drain. It need note that the metal side rail should remain unchanged, and the bearing capacity of the entire ditch remains unchanged.

Beveling of finished drains
Beveling of finished drains and beveling of covers will make the overall effect more beautiful. It can be used under the light load of garden type, but for heavy-duty applications, we do not recommend the miter cover to give the maximum support.